Aprilia Superstore - Exhaust

Browse Exhaust Products

Sort
View
 
Items 1-37 of 37
Description: For 2009-2015 RSV4 (all variants) and 2011-2016 Tuono V4 (all variants), Tuono V4 1100 (all variants)
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: Akrapovic Carbon Racing Slip-On Exhaust System For '16 RSV4 (all variants)

Race ECU, or Race ECU software are strongly recommended. RACE ECU Part number: CM264504
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4/Tuono V4
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: 2009-2013 RSV4 and Tuono V4
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: Aprilia Accessory "Race" ECU

For 2017 RSV4 RF and 2017 RSV4 RR

This ECU is pre-programmed with the official Aprilia the RACE map for use with aftermarket full system or slip-on exhausts.

Traction control and power per gyro angle settings on this ECU are more conservative than those used on the Aprilia Corse ECU.

*Please Note: Dealer installation is required, due to throttle and handle learning procedures (ride by wire re-calibration) that must be done with the Aprilia dealer only PADs diagnostic computer.

This is an electrical part. All electronic parts sales are final. Electronic parts are non-refundable, non-returnable.

Not USA Emissions/DOT legal. For Closed Circuit Use Only.

Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4 2009-2014
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4 2009-2014
Tuono V4 2011-2014
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4 2009-2014
Tuono V4 2011-2014
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: Fits:
RSV4 2009-2015
Tuono V4 2011-2016

*Does NOT include ECU unlock codes*
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4 2009-2014
Tuono V4 2011-2014
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: Austin Racing GP1 Exhausts


- Fits both stock or Akro EVO Headers
- Comes with billet exhaust bracket
- The stunning new GP1
- The GP1 is our latest exhaust design with clean lines, no springs and minimal parts to give a slick clean look
- It sounds & looks like MotoGP race bikes!
- Now Also Available To Bolt Straight Onto Akrapovic Headers, When Placing Order Please Be Sure To Order For Your Correct Model Of V4
- As with all of our exhausts performance gains of 5-6 bhp will be achieved with the slip on and full systems around 10 bhp
- No remap required for the slip on options but adding a race ecu and fueling module will give significant gains as seen with our GP2 and GP2R options.
- Like the GP2 it uses internal baffling to allow you to control db levels from 102 to 110 plus-loud!
- All Options Are Titanium With GP Ultimate Style Ti / Carbon Can as well as TI or black ceramic tips.
- Carbon option is a sleeve over titanium, as such it will last for life!
- Removable db killer also supplied.
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 MUFFLER FITTING SET
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 MUFFLER BRACKET WITH FITTING SET
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: Carbon fiber exhaust hanger to be used with Akrapovic slip on systems for RSV4 and Tuono V4.
**Includes hardware to mount hanger**
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 TITANIUM PIPES COMPLETE SET
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 FLANGE
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 896136 Carbon Evo Hex pipe only
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 CARBON END CAP
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 MUFFLER BRACKET FITTING SET
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 FRONT HEADER TITANIUM TUBE SET
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: SC Project GP70-R Titanium Slip-On

Fits: 2017-2019 RSV4 RR & RSV4 RF

2017-2019 Tuono V4 1100 (all models)

Full titanium silencer with CNC-machined pipes in titanium Conical link pipe has 60mm outlet (exhaust canister has 60mm inlet and 70mm outlet.) Everything to install the exhaust on the bike is included: 1 silencer, 1 link pipe, springs and screws, high temperature stickers This exhaust is not road legal. RACE ecu or Race Mapping is mandatory with this product. This system does not have a removable baffle. *Does not fit with Akrapovic headers. Works with Stock headers only.*
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4 09-14
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4 and Tuono V4
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: RSV4, Tuono V4
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 LINK TITANIUM PIPE
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 CARBON FIBER MUFFLER CLAMP
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 MUFFLER REPAIR KIT
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 SLEEVE REPAIR KIT
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 DB-KILLER
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: Race ECU for '09-'15 RSV4 (all variants) and '11-'15 Tuono V4.
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: Aprilia Evolution II Full System By Akrapovic with TITANIUM CANISTER and removable baffle

For '09-'15 RSV4-R, RSV4 Factory, RSV4 APRC and '11-'15 Tuono V4

Hydroformed Titanium pipes with Titanium Hexagonal muffler, derived from experience gained in the World Superbike Series.

The EVO II features a different header design with a new crossover pipe that provides more linear power at mid revolutions, while keeping the same peak horsepower as the earlier EVO I.

Features CNC machined exhaust flanges that connect the pipe to the cylinder head with a hanger bracket made from carbon fiber.

Complete kit weight is an impressive 10.7 lbs with best torque increases from 4500-8000 rpm.

Dyno results show a power increase of 6-9 horsepower.
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 REAR HEADER TITANIUM TUBE SET
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: SC Project Titanium Slip-On CRT Exhaust

Fits 2016 RSV4 RF and RSV4 RR

SC-Project exhausts are hand made right along side the same exhausts you see on MotoGP bikes and at race tracks around the world. SC-Project is committed to putting race quality performance, sound and weight reduction in the hands of all motorcycle enthusiasts. Slip-on silencer. In the slip-on line the specific link pipe is included in the kit. Full titanium silencer with CNC-machined pipes in titanium Conical link pipe 60mm - 70mm in full titanium Everything to install the exhaust on the bike. Racing version, not for road use. CR-T is a "Race Replica" silencer, coming directly from MotoGP, so there is not the possibility of a dB killer insert.
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: SC Project Titanium Slip-On CRT Exhaust

Fits 2016 RSV4 RF and RSV4 RR

SC-Project exhausts are hand made right along side the same exhausts you see on MotoGP bikes and at race tracks around the world. SC-Project is committed to putting race quality performance, sound and weight reduction in the hands of all motorcycle enthusiasts. Slip-on silencer. In the slip-on line the specific link pipe is included in the kit. Full titanium silencer with CNC-machined pipes in titanium Conical link pipe 60mm - 70mm in full titanium Everything to install the exhaust on the bike. Racing version, not for road use. CR-T is a "Race Replica" silencer, coming directly from MotoGP, so there is not the possibility of a dB killer insert.
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: SC Project Titanium Slip-On CRT Exhaust

Fits: 2017-2019 RSV4 RR
2017-2018 RSV4 RF'
2017-2019 Tuono V4 1100

Can also be installed on '19 RSV4 1100 Factory but Aftermarket rearsets with low mount bracket or a '17-'18 Spec OEM/stock rear set must also be purchased.
SC-Project exhausts are hand made right along side the same exhausts you see on MotoGP bikes and at race tracks around the world. SC-Project is committed to putting race quality performance, sound and weight reduction in the hands of all motorcycle enthusiasts. Slip-on silencer. In the slip-on line the specific link pipe is included in the kit. Full titanium silencer with CNC-machined pipes in titanium Conical link pipe 60mm - 70mm in full titanium Everything to install the exhaust on the bike. Racing version, not for road use. CR-T is a "Race Replica" silencer, coming directly from MotoGP, so there is not the possibility of a dB killer insert.
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: 2009-2012 RSV4 and Tuono V4
Condition: New

COVID-19: we are temporarily unable to accept orders.

Description: piece, subassembly of 894732 STRIPES
Condition: New

COVID-19: we are temporarily unable to accept orders.

Items 1-37 of 37